Electronic radiator is a new kind of radiator in recent years. Electronic radiator is a product of combining heat pipe technology with radiator technology. Its heat dissipation efficiency is high. The specific requirements of using environment are as follows:

1.When used in high voltage or high voltage devices, the above water quality requirements or high water quality requirements shall be ensured.

2.The quality of cooling water should be required. The inlet water temperature should not be higher than 35 C and the water flow rate should be 4-18 L/min.

The resistivity of circulating water should be no less than 2.5Ki2 and the PH value should be between 6 and 9.

3.Water-cooling devices, water-electronic radiators, cooling radiators and indispensable water circulation systems are needed for water-cooling.

Electronic radiator

4.When water-cooled radiators are working, special attention should be paid to preventing leakage, clogging and condensation.

5.When the air-cooled radiator is installed, the inlet air temperature of the electronic radiator is not higher than 400C, and the inlet wind speed is 4-6mls. The radiator blade should follow the direction of the cooling air flow.

6.When choosing the radiator in the whole machine, we should check the relationship curve between the heat resistance, flow resistance and wind speed of the radiator according to the load requirement and the capacity of the fan, and consider the two parameters of the heat resistance and wind resistance of the electronic radiator comprehensively. When the heat is transferred to the top of the electronic radiator, it is necessary to distribute the heat to the surrounding environment as soon as possible. For the air-cooled electronic radiator, the electronic radiator is to exchange heat with the surrounding air. At this time, heat is transferred between two different media. The formula followed by the electronic radiator is Q=alpha XAX T.

When the heat is transferred to the air, the temperature of the air in contact with the radiator will rise sharply. At this time, the hot air should take heat away by convection with the surrounding cold air as far as possible. For the air-cooled radiator, the main means is to increase the speed of air flow and use fans to achieve forced convection.

Generally, the electronic radiator with natural heat dissipation mode is chosen. Its working environment should be well ventilated and free of easily adhered dust and floating matter. The driving objects of this kind of converter are mostly household air-conditioning and numerical control machine tools, which have low power and good use environment. The industry reflects the good performance of heat pipe radiators, which is worthy of promotion.